WFS-1001-H

WFS-1001-H

WFS-1001-H

Water Flow Switch (WFS)

Application :

  • The paddle type SPDT WFS series are designed to provide excellent performance where accuracy, reliability, and rugged construction (IP54) are required used in liquid flow lines carrying water or any fluid neither harmful to brass and prosphor bronze nor classified as a hazardous fluids
  • They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate. The WFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0 degree C.
T755U

T755U

T755U

T775 Series 2000 Electronic Stand-Alone

Controllers

Features :

√  Easy-To-Use Graphical Interface

√  NEMA 4X Enclosure Option.

√  Internal Time Clock Scheduler

√  Up To Two Independent Modulating Outputs

√  Modulating High Or Low Limit Control

√  Optional Configurable Integral And Derivative Times

√  Reset Models With Simplified Setup

√  Configurable Minimum Off Time

√  Sensor Calibration

√  Fewer Models

√  Special Models

  • Universal Model (T775U)
  • Special Boiler Model (T775P)
  • Special Staged Sequencing Model (T775L)
  • Special Expansion Model (T775S)
V4ABFW16-XXX-012 (OM Series)

V4ABFW16-XXX-012 (OM Series)

V4ABFW16-XXX-012 (OM Series)

V4ABFW16-XXX-112 (OM Series)

Actuated Wafer type butterfly valves

Features :

  • Wide size range (DN 50…DN600 for PN16 type, DN50…DN350 for PN25 type)
  • For On-Off or Modulating Control
  • Wide size range (DN 50…DN300)
  • Manual override non-clutch design. Manual operation can be operated without any lever, clutch or brake upon power voltage
  • Irreversible worm gear
  • Visual mechanical position indicator for accurate visual reference of valve position
  • Anti-condensation heater and 2 aux. limit switches on standard model
  • Enclosure IP67